Fibronectin Kit ELISA
-
- Antigène Voir toutes Fibronectin Kits ELISA
- Fibronectin
-
Reactivité
- Humain
- Méthode de détection
- Colorimetric
- Type de méthode
- Sandwich ELISA
- Gamme de detection
- 156-10000 pg/mL
- Seuil minimal de détection
- 156 pg/mL
- Application
- ELISA
- Fonction
- For quantitative detection of Fibronectin in human serum, plasma, body fluids, tissue lysates or cell culture supernatants.
- Type d'échantillon
- Cell Culture Supernatant, Plasma, Serum, Tissue Lysate
- Analytical Method
- Quantitative
- Sensibilité
- < 10 pg/mL
- Ingrédients
- 1. One 96-well plate pre-coated with anti-Human Fibronectin antibody 2. Lyophilized Human Fibronectin standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Human Fibronectin antibody (Concentrated): 130 µl.
- Matériel non inclus
- 1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L
- Featured
- Discover our best selling Fibronectin Kit ELISA
- Top Product
- Discover our top product Fibronectin Kit ELISA
-
-
- Commentaires
-
This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-Fibronectin polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-Fibronectin polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the Fibronectin amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of Fibronectin can be calculated.
- Plaque
- Pre-coated
- Préparation des réactifs
-
- Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.
- Préparation de l'échantillon
-
Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
Tissue lysate, body fluids and cell culture supernatants: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 1000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C .
Plasma: Collect plasma with heparin, citrate or EDTA as the anticoagulant. Centrifuge for 15 min at 1000 x g within 30 min of collection. Analyze immediately or aliquot and store frozen at -20 °C. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP. - Restrictions
- For Research Use only
-
- Agent conservateur
- Sodium azide, Thimerosal (Merthiolate)
-
- Antigène Voir toutes Fibronectin Kits ELISA
- Fibronectin
- Autre désignation
- Fibronectin / FN (Fibronectin Produits)
- Synonymes
- FN Kit ELISA, cig Kit ELISA, fibronectin Kit ELISA, finc Kit ELISA, lets Kit ELISA, msf Kit ELISA, CIG Kit ELISA, ED-B Kit ELISA, FINC Kit ELISA, FNZ Kit ELISA, GFND Kit ELISA, GFND2 Kit ELISA, LETS Kit ELISA, MSF Kit ELISA, E330027I09 Kit ELISA, Fn Kit ELISA, Fn-1 Kit ELISA, FIBNEC Kit ELISA, fn-1 Kit ELISA, fibronectin 1 Kit ELISA, FN1 Kit ELISA, fn1 Kit ELISA, Fn1 Kit ELISA
- Sujet
- Fibronectin is a high-molecular weight (~440kDa) glycoprotein of the extracellular matrix, belongs to a family of high molecular weight glycoproteins that are present on cell surfaces, in extracellular fluids, connective tissues, and basement membranes. Two major forms of fibronectin exist: a plasma soluble form and a cellular form. It plays a major role in cell adhesion, growth, migration, and differentiation, and it is important for processes such as wound healing and embryonic development. Fibronectin has been implicated in carcinoma development, and also acts as a potential biomarker for radioresistance.
-