CD31 Kit ELISA

N° du produit ABIN1112673

Détail du produit CD31 Kit ELISA

Antigène: CD31 (PECAM1) (Platelet/endothelial Cell Adhesion Molecule (PECAM1))

Reactivité: Souris

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 156-10000 pg/mL

Seuil minimal de détection: 156 pg/mL

Application: ELISA

Fonction: For quantitative detection of PECAM-1 in mouse serum, plasma, body fluids, tissue lysates or cell culture supernatants.

Type d'échantillon: Cell Culture Supernatant, Plasma, Serum, Tissue Lysate

Analytical Method: Quantitative

Sensibilité: < 10 pg/mL

Ingrédients: 1. One 96-well plate pre-coated with anti-Mouse PECAM-1 antibody 2. Lyophilized Mouse PECAM-1 standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Mouse PECAM-1 antibody (Concentrated): 130 µl.

Matériel non inclus: 1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L

Information d'application

Commentaires:

This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-PECAM-1 polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-PECAM-1 polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the PECAM-1 amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of PECAM-1 can be calculated.

Plaque: Pre-coated

Préparation des réactifs:

1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.

Préparation de l'échantillon:

Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
Tissue lysate, body fluids and cell culture supernatants: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 1000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C .
Plasma: Collect plasma with heparin or EDTA as the anticoagulant. Centrifuge for 15 min at 1000 x g within 30 min of collection. For eliminating the platelet effect, suggesting that further centrifugation for 10 min at 2-8°C at 10000 x g. Analyze immediately or aliquot and store frozen at -20 °C. Citrate can not be used as anticoagulant here. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

Restrictions: For Research Use only

Stockage

Agent conservateur: Sodium azide, Thimerosal (Merthiolate)

Détail du antigène

Antigène: CD31 (PECAM1) (Platelet/endothelial Cell Adhesion Molecule (PECAM1))

Autre désignation: CD31 / PECAM-1 (PECAM1 Produits)

Synonymes: CD31 Kit ELISA, CD31/EndoCAM Kit ELISA, GPIIA' Kit ELISA, PECA1 Kit ELISA, PECAM-1 Kit ELISA, endoCAM Kit ELISA, C85791 Kit ELISA, Cd31 Kit ELISA, Pecam Kit ELISA, platelet/endothelial cell adhesion molecule 1 Kit ELISA, platelet and endothelial cell adhesion molecule 1 Kit ELISA, pecam1 Kit ELISA, PECAM1 Kit ELISA, Pecam1 Kit ELISA

Sujet: Platelet endothelial cell adhesion molecule (PECAM-1) also known as cluster of differentiation 31 (CD31), is a member of the immunoglobulin (Ig) superfamily that is expressed on the surface of circulating platelets, monocytes, neutrophils, and particular T-cell subsets. PECAM1 plays a role as an adhesion receptor in thrombosis, hemostasis, immunity, and inflammatory response, and it is also an important target glycoprotein in drug-induced immune thrombocytopenia.

Pathways: Regulation of Actin Filament Polymerization