Tel:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@anticorps-enligne.fr

L-Selectin Kit ELISA

SELL Reactivité: Humain Colorimetric Sandwich ELISA 62.5-4000 pg/mL
N° du produit ABIN1112740
  • Antigène Voir toutes L-Selectin (SELL) Kits ELISA
    L-Selectin (SELL) (Selectin L (SELL))
    Reactivité
    • 7
    • 7
    • 5
    • 5
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Humain
    Méthode de détection
    Colorimetric
    Type de méthode
    Sandwich ELISA
    Gamme de detection
    62.5-4000 pg/mL
    Seuil minimal de détection
    62.5 pg/mL
    Application
    ELISA
    Analytical Method
    Quantitative
    Sensibilité
    < 5 pg/mL
    Ingrédients
    1. One 96-well plate pre-coated with anti-Human L-Selectin antibody 2. Lyophilized L-Selectin standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Human L-Selectin antibody (Concentrated): 130 µl.
    Matériel non inclus
    1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L
    Featured
    Discover our best selling SELL Kit ELISA
    Top Product
    Discover our top product SELL Kit ELISA
  • Commentaires

    This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti- L-Selectin polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti- L-Selectin polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the L-Selectin amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of L-Selectin can be calculated.

    Plaque
    Pre-coated
    Préparation des réactifs
    1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.
    Préparation de l'échantillon

    Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
    Tissue lysate, body fluids or cell culture supernate: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
    Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 2000 × g for 20 min. Analyze the serum immediately or aliquot and store at -20 °C .
    Plasma: Collect plasma with EDTA as the anticoagulant. Centrifuge for 10 min at 2000 x g within 30 min of collection. Analyze immediately or aliquot and store frozen at -20 °C. Heparin and citrate can not be used as anticoagulant here. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

    Restrictions
    For Research Use only
  • Agent conservateur
    Sodium azide, Thimerosal (Merthiolate)
  • Antigène Voir toutes L-Selectin (SELL) Kits ELISA
    L-Selectin (SELL) (Selectin L (SELL))
    Autre désignation
    L-Selectin (SELL Produits)
    Synonymes
    CD62L Kit ELISA, LAM1 Kit ELISA, LECAM1 Kit ELISA, LEU8 Kit ELISA, LNHR Kit ELISA, LSEL Kit ELISA, LYAM1 Kit ELISA, PLNHR Kit ELISA, TQ1 Kit ELISA, A.11 Kit ELISA, L-selectin Kit ELISA, LECAM-1 Kit ELISA, SELE Kit ELISA, AI528707 Kit ELISA, Lnhr Kit ELISA, Ly-22 Kit ELISA, Ly-m22 Kit ELISA, Lyam-1 Kit ELISA, Lyam1 Kit ELISA, selectin L Kit ELISA, selectin, lymphocyte Kit ELISA, SELL Kit ELISA, Sell Kit ELISA
    Sujet
    L-selectin, also known as CD62L, is a cell adhesion molecule found on lymphocytes. It belongs to the selectin family of proteins, which recognize sialylated carbohydrate groups. The molecule is composed of multiple domains: one homologous to lectins, one to epidermal growth factor, and two to the consensus repeat units found in C3/C4-binding proteins. L-selectin acts as a homing receptor for lymphocytes to enter secondary lymphoid tissues via high endothelial venules. Ligands present on endothelial cells will bind to lymphocytes expressing L-selectin, slowing lymphocyte trafficking through the blood, and facilitating entry into a secondary lymphoid organ at that point. It may also play a role in neutrophil adhesion to endothelium at sites of inflammation.
Vous êtes ici:
Support technique