MMP16 Kit ELISA

N° du produit ABIN5656734

Détail du produit MMP16 Kit ELISA

Antigène: MMP16 (Matrix Metallopeptidase 16 (Membrane-inserted) (MMP16))

Reactivité: Humain

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 0.156 ng/mL - 10 ng/mL

Seuil minimal de détection: 0.156 ng/mL

Application: ELISA

Type d'échantillon: Plasma, Serum, Tissue Homogenate

Analytical Method: Quantitative

Specificité: This assay has high sensitivity and excellent specificity for detection of Matrix Metalloproteinase 16 (MMP16). No significant cross-reactivity or interference between Matrix Metalloproteinase 16 (MMP16) and analogues was observed.

Sensibilité: 0.058 ng/mL

Information d'application

Commentaires:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Durée du test: 3 h

Plaque: Pre-coated

Protocole: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Matrix Metalloproteinase 16 (MMP16). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Matrix Metalloproteinase 16 (MMP16). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Matrix Metalloproteinase 16 (MMP16), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Matrix Metalloproteinase 16 (MMP16) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Précision du teste: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Matrix Metalloproteinase 16 (MMP16) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Matrix Metalloproteinase 16 (MMP16) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Stock: 4 °C,-20 °C

Stockage commentaire: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Date de péremption: 4-8 months

Détail du antigène

Antigène: MMP16 (Matrix Metallopeptidase 16 (Membrane-inserted) (MMP16))

Autre désignation: Matrix Metalloproteinase 16 (MMP16 Produits)

Synonymes: MT3-MMP Kit ELISA, Mt3mmp Kit ELISA, Mt3-mmp Kit ELISA, C8orf57 Kit ELISA, MMP-X2 Kit ELISA, MT-MMP2 Kit ELISA, MT-MMP3 Kit ELISA, matrix metallopeptidase 16 Kit ELISA, Mmp16 Kit ELISA, MMP16 Kit ELISA

Sujet:

Gene Name: Matrix Metalloproteinase 16

Gene Aliases: MT3-MMP, MMP16, MMP-X2, MT-MMP2, MT-MMP3, Membrane-type matrix metalloproteinase 3, Membrane-type-3 matrix metalloproteinase

ID gène: 4325

UniProt: P51512