FASL Kit ELISA
-
- Antigène Voir toutes FASL Kits ELISA
- FASL (Fas Ligand (TNF Superfamily, Member 6) (FASL))
-
Reactivité
- Rat
- Méthode de détection
- Colorimetric
- Type de méthode
- Sandwich ELISA
- Gamme de detection
- 90-60000 pg/mL
- Seuil minimal de détection
- 90 pg/mL
- Application
- ELISA
- Fonction
- Rat Fas Ligand (TNFSF6) ELISA Kit for cell culture supernatants, plasma, and serum samples.
- Type d'échantillon
- Plasma, Cell Culture Supernatant, Serum
- Analytical Method
- Quantitative
- Specificité
- This ELISA kit shows no cross-reactivity with the following cytokines tested: rat CINC-2, CINC-3, CNTF, Fractalkine, IL-1 alpha, IL-1 beta, IL-4, IL-6, IL-10, GM-CSF, IFN-gamma, Leptin, Lix, MCP-1, MIP-3 alpha, beta- NGF, TIMP-1, TNF-alpha.
- Réactivité croisée (Details)
- This ELISA kit shows no cross-reactivity with the following cytokines tested: rat CINC-2, CINC-3, CNTF, Fractalkine, IL-1alpha, IL-1beta, IL-4, IL-6, IL-10, GM-CSF, IFN-gamma, Leptin, Lix, MCP-1, MIP-3alpha, beta- NGF, TIMP-1, TNF-alpha.
- Sensibilité
- < 90 pg/mL
- Attributs du produit
-
- Strip plates and additional reagents allow for use in multiple experiments
- Quantitative protein detection
- Establishes normal range
- The best products for confirmation of antibody array data
- Ingrédients
-
- Pre-Coated 96-well Strip Microplate
- Wash Buffer
- Stop Solution
- Assay Diluent(s)
- Lyophilized Standard
- Biotinylated Detection Antibody
- Streptavidin-Conjugated HRP
- TMB One-Step Substrate
- Matériel non inclus
-
- Distilled or deionized water
- Precision pipettes to deliver 2 μL to 1 μL volumes
- Adjustable 1-25 μL pipettes for reagent preparation
- 100 μL and 1 liter graduated cylinders
- Tubes to prepare standard and sample dilutions
- Absorbent paper
- Microplate reader capable of measuring absorbance at 450nm
- Log-log graph paper or computer and software for ELISA data analysis
- Featured
- Discover our best selling FASL Kit ELISA
- Top Product
- Discover our top product FASL Kit ELISA
-
-
- Indications d'application
- Recommended Dilution for serum and plasma samples2 fold
- Volume d'échantillon
- 100 μL
- Plaque
- Pre-coated
- Protocole
-
- Prepare all reagents, samples and standards as instructed in the manual.
- Add 100 μL of standard or sample to each well.
- Incubate 2.5 h at RT or O/N at 4 °C.
- Add 100 μL of prepared biotin antibody to each well.
- Incubate 1 h at RT.
- Add 100 μL of prepared Streptavidin solution to each well.
- Incubate 45 min at RT.
- Add 100 μL of TMB One-Step Substrate Reagent to each well.
- Incubate 30 min at RT.
- Add 50 μL of Stop Solution to each well.
- Read at 450 nm immediately.
- Préparation des réactifs
-
- Bring all reagents and samples to room temperature (18 - 25 °C) before use.
2. Sample dilution: Assay Diluent C (Item L) should be used for dilution of serum/plasma samples. 1x Assay Diluent B (Item E) should be used for dilution of cell culture supernates. RayBio®Rat Fas L ELISA Kit Protocol 3 Suggested dilution for normal serum/plasma: 2 fold. Please note that levels of the target protein may vary between different specimens. Optimal dilution factors for each sample must be determined by the investigator.
3. Assay Diluent B should be diluted 5-fold with deionized or distilled water before use.
4. Preparation of standard: Briefly spin the vial of Item C and then add 666 µL Assay Diluent C (for serum/plasma samples) or 1x Assay Diluent B (for cell culture supernates) into Item C vial to prepare a 60 ng/mL standard. Dissolve the powder thoroughly by a gentle mix. Pipette 240 µL Assay Diluent C or 1x Assay Diluent B into each tube. Use the 60,000 pg/mL standard solution to produce a dilution series . Mix each tube thoroughly before the next transfer. Assay Diluent C or 1x Assay Diluent B serves as the zero standard (0 pg/mL). 200 µL 200 µL 200 µL 200 µL 200 µL Item C, standard vial + 666 µL 200myl 60,000 20,000 6667 2222 740.7 246.9 82.30 0 pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL
5. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 ml of Wash Buffer Concentrate into deionized or distilled water to yield 400 ml of 1x Wash Buffer. RayBio®Rat Fas L ELISA Kit Protocol 4
6. Briefly spin the Detection Antibody vial (Item F) before use. Add 100 µL of 1x Assay Diluent B into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days). The detection antibody concentrate should be diluted 80-fold with 1x Assay Diluent B and used in step 4 of Part VI Assay Procedure.
7. Briefly spin the HRP-Streptavidin concentrate vial (Item G) and pipette up and down to mix gently before use. HRP-Streptavidin concentrate should be diluted 160-fold with 1x Assay Diluent B. For example: Briefly spin the vial (Item G) and pipette up and down to mix gently . Add 75 µL of HRP-Streptavidin concentrate into a tube with 12 ml 1x Assay Diluent B to prepare a 160-fold diluted HRP- Streptavidin solution (don't store the diluted solution for next day use). Mix well.
- Bring all reagents and samples to room temperature (18 - 25 °C) before use.
- Procédure de l'essai
-
- Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate.
2. Add 100 µL of each standard (see Reagent Preparation step 2) and sample into appropriate wells. Cover well and incubate for 2.5 hours at room temperature or over night at 4 °C with gentle shaking.
3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 myl) using a multi-channel pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels. RayBio®Rat Fas L ELISA Kit Protocol 5
4. Add 100 µL of 1x prepared biotinylated antibody (Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with gentle shaking.
5. Discard the solution. Repeat the wash as in step
6. Add 100 µL of prepared Streptavidin solution (see Reagent Preparation step 7) to each well. Incubate for 45 minutes at room temperature with gentle shaking.
7. Discard the solution. Repeat the wash as in step
8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking.
9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
- Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate.
- Calcul des résultats
-
Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the average zero standard optical density. Plot the standard curve on log-log graph paper or using Sigma plot software, with standard concentration on the x-axis and absorbance on the y-axis. Draw the best-fit straight line through the standard points.
Typical Data: These standard curves are for demonstration only. A standard curve must be run with each assay. Rat Fas L concentration (pg/mL) O D =4 50 (n m ) 0.001 0.01 0.1 1 10 10 100 1,000 10,000 100,000 Assay Diluent C Rat Fas L concentration (pg/mL) O D =4 50 (n m ) 0.001 0.01 0.1 1 10 10 100 1,000 10,000 100,000 Assay Diluent B RayBio®Rat Fas L ELISA Kit Protocol 7
Sensitivity: The minimum detectable dose of Fas L is typically less than 90 pg/mL.
Recovery: Recovery was determined by spiking various levels of Rat Fas L into serum, plasma and cell culture media. Mean recoveries are as follows: Sample Type Average % Recovery Range ( %) Serum 123.4 118-135 Plasma 118.9 109-125 Cell culture media 92.64 81-98
Linearity: Sample Type Serum Plasma Cell Culture Media 1:2 Average % of Expected 105.1 111.1 114.7 Range ( %) 95-114 106-118 105-122 1:4 Average % of Expected 98.81 108.6 113.2 Range ( %) 97-107 97-115 104-120
Reproducibility: Intra-Assay: CV<10 % Inter-Assay: CV<12 % RayBio®Rat Fas L ELISA Kit Protocol 8 - Précision du teste
- Intra-Assay: CV< 10 % Inter-Assay: CV< 12 %
- Restrictions
- For Research Use only
-
- Conseil sur la manipulation
- Avoid repeated freeze-thaw cycles.
- Stock
- -20 °C
- Stockage commentaire
- The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.
- Date de péremption
- 6 months
-
-
Atorvastatin acts synergistically with N-acetyl cysteine to provide therapeutic advantage against Fas-activated erythrocyte apoptosis during chronic arsenic exposure in rats." dans: Toxicology and applied pharmacology, Vol. 250, Issue 1, pp. 39-53, (2010) (PubMed).
: "
-
Atorvastatin acts synergistically with N-acetyl cysteine to provide therapeutic advantage against Fas-activated erythrocyte apoptosis during chronic arsenic exposure in rats." dans: Toxicology and applied pharmacology, Vol. 250, Issue 1, pp. 39-53, (2010) (PubMed).
-
- Antigène Voir toutes FASL Kits ELISA
- FASL (Fas Ligand (TNF Superfamily, Member 6) (FASL))
- Autre désignation
- Fas Ligand (FASL Produits)
- Synonymes
- ALPS1B Kit ELISA, APT1LG1 Kit ELISA, APTL Kit ELISA, CD178 Kit ELISA, CD95-L Kit ELISA, CD95L Kit ELISA, FASL Kit ELISA, TNFSF6 Kit ELISA, fasl Kit ELISA, Fas-L Kit ELISA, Faslg Kit ELISA, Tnfsf6 Kit ELISA, gld Kit ELISA, Apt1Lg1 Kit ELISA, Fasl Kit ELISA, FASLG Kit ELISA, zgc:162027 Kit ELISA, Fas ligand Kit ELISA, Fas ligand L homeolog Kit ELISA, Fas ligand (TNF superfamily, member 6) Kit ELISA, FASLG Kit ELISA, faslg.L Kit ELISA, Fasl Kit ELISA, Faslg Kit ELISA, faslg Kit ELISA
- Sujet
- Tumor necrosis factor ligand superfamily member 6 (CD95 ligand) (CD95-L) (Fas antigen ligand) (Fas ligand) (FasL) (CD antigen CD178)
- ID gène
- 25385
- UniProt
- P36940
- Pathways
- Apoptose, EGFR Signaling Pathway, Production of Molecular Mediator of Immune Response, Positive Regulation of Endopeptidase Activity
-