beta-Thromboglobulin Kit ELISA

N° du produit ABIN625451

Détail du produit beta-Thromboglobulin Kit ELISA

Antigène: beta-Thromboglobulin (beta-TG)

Reactivité: Rat

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 80-50000 pg/mL

Seuil minimal de détection: 80 pg/mL

Application: ELISA

Fonction: Rat TCK-1 (CXCL7) ELISA Kit for cell culture supernatants, plasma, and serum samples.

Type d'échantillon: Plasma, Cell Culture Supernatant, Serum

Analytical Method: Quantitative

Specificité: This ELISA kit shows no cross-reactivity with the following cytokines tested: rat CINC-2, CINC-3, CNTF, Fractalkine, IL-1 alpha, IL-1 beta, IL-4, IL-6, IL-10, GM-CSF, IFN-gamma, Leptin, Lix, MCP-1, MIP-3 alpha, beta- NGF, TIMP-1, TNF-alpha.

Réactivité croisée (Details): This ELISA kit shows no cross-reactivity with the following cytokines tested: rat CINC-2, CINC-3, CNTF, Fractalkine, IL-1alpha, IL-1beta, IL-4, IL-6, IL-10, GM-CSF, IFN-gamma, Leptin, Lix, MCP-1, MIP-3alpha, beta- NGF, TIMP-1, TNF-alpha.

Sensibilité: < 80 pg/mL

Attributs du produit:

• Strip plates and additional reagents allow for use in multiple experiments
• Quantitative protein detection
• Establishes normal range
• The best products for confirmation of antibody array data

Ingrédients:

• Pre-Coated 96-well Strip Microplate
• Wash Buffer
• Stop Solution
• Assay Diluent(s)
• Lyophilized Standard
• Biotinylated Detection Antibody
• Streptavidin-Conjugated HRP
• TMB One-Step Substrate

Matériel non inclus:

• Distilled or deionized water
• Precision pipettes to deliver 2 μL to 1 μL volumes
• Adjustable 1-25 μL pipettes for reagent preparation
• 100 μL and 1 liter graduated cylinders
• Tubes to prepare standard and sample dilutions
• Absorbent paper
• Microplate reader capable of measuring absorbance at 450nm
• Log-log graph paper or computer and software for ELISA data analysis

Information d'application

Indications d'application: Recommended Dilution for serum and plasma samples10,000 fold

Volume d'échantillon: 100 μL

Plaque: Pre-coated

Protocole:

1. Prepare all reagents, samples and standards as instructed in the manual.
2. Add 100 μL of standard or sample to each well.
3. Incubate 2.5 h at RT or O/N at 4 °C.
4. Add 100 μL of prepared biotin antibody to each well.
5. Incubate 1 h at RT.
6. Add 100 μL of prepared Streptavidin solution to each well.
7. Incubate 45 min at RT.
8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
9. Incubate 30 min at RT.
10. Add 50 μL of Stop Solution to each well.
11. Read at 450 nm immediately.

Préparation des réactifs:

1. Bring all reagents and samples to room temperature (18 - 25 °C) before use.
   2. Sample dilution: If your samples need to be diluted, Assay Diluent (Item E) should be used for dilution of serum/plasma/culture supernatants. Suggested dilution for normal serum/plasma: 10,000 fold. Please note that levels of the target protein may vary between different specimens. Optimal dilution factors for each sample must be determined by the investigator.
   3. Assay Diluent (Item E) should be diluted 5-fold with deionized or distilled water before use.
   4. Preparation of standard: Briefly spin the vial of Item C. Add 400 µL 1x Assay Diluent (Item E) into Item C vial to prepare a 100 ng/mL standard solution. Dissolve the powder thoroughly by a gentle mix. Add 180 µL TCK-1 standard from the vial of tem C, into a tube with 180 µL 1x Assay Diluent to prepare a 50,000 pg/mL standard solution. Pipette 240myl 1x Assay Diluent into each tube. Use the 50,000 pg/mL standard solution to produce a dilution series . Mix each tube thoroughly before the next transfer. 1x Assay Diluent serves as the zero standard (0 pg/mL). 120 µL 120 µL 120 µL 120 µL 120 µL 180 µL standard + 180 µL 120myl 50,000 16,667 5,556 1,852 617.3 205.8 68.59 0 pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL
   5. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 ml of Wash Buffer Concentrate into deionized or distilled water to yield 400 ml of 1x Wash Buffer.
   6. Briefly spin the Detection Antibody vial (Item F) before use. Add 100 µL of 1x Assay Diluent into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days). The detection antibody concentrate should be diluted 80-fold with 1x Assay Diluent and used in step 4 of Part VI Assay Procedure.
   7. Briefly spin the HRP-Streptavidin concentrate vial (Item G) and pipette up and down to mix gently before use. HRP-Streptavidin concentrate should be diluted 400-fold with 1x Assay Diluent. For example: Briefly spin the vial (Item G) and pipette up and down to mix gently . Add 30 µL of HRP-Streptavidin concentrate into a tube with 12 ml 1x Assay Diluent to prepare a 400-fold diluted HRP-Streptavidin solution (don't store the diluted solution for next day use). Mix well.

Procédure de l'essai:

1. Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate.
   2. Add 100 µL of each standard (see Reagent Preparation step 2) and sample into appropriate wells. Cover well and incubate for 2.5 hours at room temperature or over night at 4 °C with gentle shaking.
   3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 myl) using a multi-channel Pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
   4. Add 100 µL of 1x prepared biotinylated antibody (Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with gentle shaking.
   5. Discard the solution. Repeat the wash as in step
   6. Add 100 µL of prepared Streptavidin solution (see Reagent Preparation step 7) to each well. Incubate for 45 minutes at room temperature with gentle shaking.
   7. Discard the solution. Repeat the wash as in step
   8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking.
   9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.

Calcul des résultats:

Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the average zero standard optical density. Plot the standard curve on log-log graph paper or using Sigma plot software, with standard concentration on the x-axis and absorbance on the y-axis. Draw the best-fit straight line through the standard points.
Typical Data: These standard curves are for demonstration only. A standard curve must be run with each assay. Assay Diluent Rat TCK-1 concentration (pg/mL) O D =4 50 n m 0.001 0.01 0.1 1 10 10 100 1,000 10,000 100,000
Sensitivity: The minimum detectable dose of TCK-1 is typically less than 80 pg/mL.
Recovery: Recovery was determined by spiking TCK-1 into normal Rat serum, plasma and cell culture media. Mean recoveries are as follows: Sample Type Average % Recovery Range ( %) Serum 119.2 109-129 Plasma 116.3 93-132 Cell culture media 115.5 104-124
Linearity: Sample Type Serum Plasma Cell Culture Media 1:2 Average % of Expected 123.4 111.4 112.5 Range ( %) 114-133 102-120 102-121 1:4 Average % of Expected 126.4 97.30 88.92 Range ( %) 117-140 86-105 80-97
Reproducibility: Intra-Assay: CV<10 % Inter-Assay: CV<12 %

Précision du teste: Intra-Assay: CV< 10 % Inter-Assay: CV< 12 %

Restrictions: For Research Use only

Stockage

Conseil sur la manipulation: Avoid repeated freeze-thaw cycles.

Stock: -20 °C

Stockage commentaire: The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.

Date de péremption: 6 months

Détail du antigène

Antigène: beta-Thromboglobulin (beta-TG)

Autre désignation: TCK-1 (beta-TG Produits)

Synonymes: B-TG1 Kit ELISA, Beta-TG Kit ELISA, CTAP-III Kit ELISA, CTAP3 Kit ELISA, CTAPIII Kit ELISA, CXCL7 Kit ELISA, LA-PF4 Kit ELISA, LDGF Kit ELISA, MDGF Kit ELISA, NAP-2 Kit ELISA, PBP Kit ELISA, SCYB7 Kit ELISA, TC1 Kit ELISA, TC2 Kit ELISA, TGB Kit ELISA, TGB1 Kit ELISA, THBGB Kit ELISA, THBGB1 Kit ELISA, CTAPIII/NAP-2 Kit ELISA, 2400003M24Rik Kit ELISA, AI854500 Kit ELISA, Cxcl7 Kit ELISA, NAP-2-L1 Kit ELISA, Scyb7 Kit ELISA, b-TG1 Kit ELISA, beta-TG Kit ELISA, Nap-2 Kit ELISA, pro-platelet basic protein Kit ELISA, PPBP Kit ELISA, Ppbp Kit ELISA

Sujet: CXC chemokine RTCK1 (Chemokine (C-X-C motif) ligand 7, isoform CRA_b) (Protein Ppbp)

ID gène: 246358

UniProt: Q99ME0